Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who enjoys the fast cooking control of gas cooktops but wants an electric oven for baking? Discover a dual-fuel range cooker that gives you the best of both worlds.
Many experienced home chefs prefer gas cooktops due to their superior temperature control and the ability to use advanced cooking techniques such as charring. These powerhouse stoves can be expensive, particularly when you need an additional gas hook-up as well as an electrician to install it.
What is a 13amp outlet?
If you own a dual-fuel range cooker (also called a gas and electric oven), you will need an outlet with 13 amps. The plug must also be hard-wired by a certified electrician to the cooker ring.
This ensures that the current flowing through the plug is safe and not too high, which could cause an electrical fire danger. The plug is equipped with an electric fuse that regulates the current. The fuse will blow as soon as it is overloaded. This safeguards the appliance from overloads of electricity.
The fuse is classified at 13 amps, as indicated on the top of the plug and this indicates the maximum current that the plug can carry without causing damage to the appliance or overheating the socket. It is important to ensure that when replacing fuses, you always use the same rated amperage as the original. There is a risk of overheating the socket if you replace a fuse using an unrelated rating.
Ceramic 13 amp fuses are very durable, and can withstand high temperatures that can be generated by an oven. Ceramic elements are also fire-resistant, and thus a better choice than other types.
There are a few different ways in which 13 amp plugs can be installed. The plug can be connected to a live socket using screws or a plastic jaw cord clamp. The plug should be placed in a secure position and tightened, making sure the cord clamp is secure.
Before connecting the wires, you might need to take off the wiring diagram printed on cardboard that is positioned over the pins of some plugs. The wires should be cut to the correct length, as if they are too long they could be crushed when the plug covers are replaced. The earth wire should be the longest to ensure it is connected prior to the line and neutral pins.
How do I fit a 13amp plug?
The majority of dual fuel range cookers sold in UK are equipped with an amp rating of 13 amps. This is vital since ovens draw substantial current, while the standard plug sockets have a rating of 10 amps.
In general, new appliances should be equipped with a plug at the point of purchase and it is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not have the plug, and this is where the problem arises.
The first thing to consider when connecting a cooktop to an existing plug socket is to check that the rating of the fuse in the fuse box is in line with the rating of the plug. This is crucial because an incorrectly-sized fuse can be dangerous.
It is also recommended to ensure that the fuse is fully seated within the cartridge and that there isn't any movement within it. Next up is to prepare the flex to be used. Remove the sheathing from the flex to expose the three insulated conductors within. Utilize a utility knife to cut the sheathing just beyond the grip of the cord at the point of entry into the plug. The blade will not be able to penetrate the insulated conductors. This nick should be wide enough to allow the sheathing to split and expand the nick as it is pulled back revealing the cable underneath. Finally cut off the excess sheathing and leave approximately 40mm of length that extends beyond the flexing end.
The flex is then positioned over the plug, with the earth terminal at the top and the live and neutral terminals at the bottom. Using the conductors with the colors to guide you and the sheathing is removed from each pin and the internal cable is fixed to the correct terminal using the cord grip. If the plug is fitted with a screw type cord clamp loosen it, and then pull back the insulation to reveal the copper conductors. Connect each of the conductors insulated to the appropriate terminal (starting with the earth, then neutral and finally the live) by using the channel they run through the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for 13amp plugs at 300 volts is 3kw. This is a large amount of power, however the standard fuse in a UK plug will not fail until the cable is at a risky temperature. It is essential to be aware of the amount of electricity you use in your kitchen, as an unfit plug or socket could cause an explosion.
The ceramic fuses used in plugtops are approximately 25mm and are rated for mains voltages of 240V. The fuses will bear the BS Kitemark or a similar mark on their side, and they'll contain sand. Glass or plastic alternatives are available, but they should not be used in conjunction with a live plug.
The majority of dual fuel range cookers sold in the UK need to be hard-wired and cannot be plugged directly into the wall socket. They are usually connected via a dedicated cooker circuit, which is suitable only for appliances that can handle up to 20 amps.
Examine the ring circuit in your home using the fuse box, or ask an electrician nearby. Ask them if the sockets are on the same ring or if they are distinct. They should also be able to inform you if there is an individual circuit that powers your oven.
If you're considering buying a new dual-fuel range cooker, the size of your kitchen is a crucial aspect to take into consideration. We offer a broad selection of cookers that can fit any space. Choose from small 50-60cm dual-fuel models or vast 90cm+ double oven options from top brands like Rangemaster and StovesAreUs.
We also have a broad range of multifunction electric and gas cookers. These multifunction cookers can be used to cook a variety of meals such as pasta, casseroles and curries!
Explore our entire range of Cookers in Currys on our website or visit us in store for a look. We provide free delivery and installation at home on selected range cookers and also flexible payment options. If you have any questions our team is on hand to help send us an email or give us a call. Credit is subjected to status, and terms & conditions apply.
What is the most draw for an appliance switch?
There is plenty of confusion over what the maximum current draw of a cooker switch is. Most cookers are hard-wired and connected to a specific oven-ring circuit and not a standard socket. This is due to the fact that they usually consume more than 20 amps when the electric and gas hob oven are used.
You will not find dual fuel range cookers that can be installed in a standard socket, as this would pose an extremely high risk of fire and infringe electrical regulations. A licensed electrician will install any new electrical components to the kitchen cooker and ensure that the total load (both the hob and oven) do not exceed the capacity of supply of that circuit.
The benefits of a dual fuel range cooker are the responsive heating of a gas cooktop along with the precision of an electric oven. They are adored by both home cooks and chefs. Dual cookers that use fuel are great to experiment with different cooking techniques, including searing or charring.
When you are looking to purchase an appliance for your kitchen, you'll have to consider various aspects such as size, functionality and price. It is also necessary to have an electrical connection to your home to connect the appliance. If you're unsure, it's best to have a Gas Safe engineer inspect your home prior to installing.
Currys' dual fuel range cookers are available with a variety of models that will fit all budgets. From budget-friendly models from Indesit and Zanussi, to our own Essentials collection. If Click That Link are seeking something more sophisticated we have a selection of top JennAir models, that come with many new features.
It is important to read the instruction manual for the owner before purchasing a dual fuel range cooker. It will provide you with specific information about the gas and electrical requirements. You will require gas connections in your home. dual-fuel range style cookers might be required to set it up for you. You might also require a dedicated cooker-ring circuit, installed by a certified electrical engineer.